T-Spin2X Spintronic THz Emitter for 800 nm
The T-Spin2X is our enhanced-performance large-area spintronic terahertz emitter, optimized for 800 nm excitation. Pumped with 5 mJ pulses from an 800 nm amplifier, it generates THz peak fields above 600 kV/cm, twice the field of the T-Spin2 under identical excitation, with a spectrum from 0.1 to 30 THz without gaps. Under comparable excitation it delivers a stronger and much shorter THz pulse than a lithium niobate source, and it needs no phase matching and no bias voltage.
- THz peak fields above 600 kV/cm with 5 mJ pump pulses at 800 nm
- Twice the peak field of the T-Spin2 under identical excitation
- Stronger, shorter THz pulses than lithium niobate under comparable excitation
- No filter needed: it absorbs practically all of the pump light
- 0.1 to 30 THz without spectral gaps (15 fs pump pulses)
- Focused or collimated pump beams up to 34 mm in diameter
- Fully passive, with 360° control of the linear THz polarization
Technical data
| THz bandwidth | 0.1 to 30 THz without spectral gaps, with 15 fs pump pulses1 |
|---|---|
| THz peak field | More than 600 kV/cm, twice the T-Spin22 |
| Ideal excitation | Focused or collimated pump beam, up to 34 mm diameter, optimized for 800 nm |
| Pump wavelength | Optimized for 800 nm, works from the mid-infrared to X-rays |
| Maximum excitation fluence | 0.5 mJ/cm² |
| THz polarization | Linear, rotatable through 360° with the integrated magnet |
| Geometry | Transmission and reflection: the THz pulse leaves forward and backward, collinear with the pump |
| Emitter | Diameter 50.8 mm, thickness 0.5 mm |
| Magnet | Outer diameter 50.8 mm, inner diameter 36.3 mm, thickness 7 mm |
| Rotation mount | Identical to Thorlabs RSP2/M, M4 thread at the bottom (post not included) |
1 The bandwidth scales roughly inversely with the pump pulse duration and depends on your setup. 2 Peak field in the focus, with 5 mJ pump pulses of 45 fs at 800 nm, 1 kHz repetition rate and about 0.5 mJ/cm². Under identical excitation, the T-Spin2 reaches more than 300 kV/cm. Actual values depend on your experimental conditions. Full datasheet (PDF)
Measured against lithium niobate
Lithium niobate is the standard source for strong terahertz fields. Under comparable excitation conditions, with 45 fs pump pulses at 800 nm, 1 kHz repetition rate and about 0.5 mJ/cm², the T-Spin2X reached a higher peak field than a lithium niobate source, in a much shorter pulse.
A shorter pulse means a broader spectrum, and the T-Spin2X needs no phase matching. With 15 fs pulses at 800 nm it also shows a clearly higher spectral amplitude than the T-Spin2 across the whole spectrum. Both comparisons are in the datasheet.
Many nonlinear THz experiments also need the reversed field. With the T-Spin2X, you turn the emitter by 180° and the THz field flips without any loss. With a lithium niobate source, the usual way is a pair of polarizers, which costs at least half of the field.
How a spintronic terahertz emitter works
A femtosecond pump pulse launches a spin current from a magnetic metal layer into a neighbouring non-magnetic metal layer. There, spin-orbit coupling (the inverse spin Hall effect) converts it into an ultrafast charge current, which radiates the terahertz pulse.
The layers are only nanometres thick, need no phase matching and, unlike crystals, have no phonon resonances. That is why the spectrum has no gaps and why the emitter works at almost any pump wavelength. The THz polarization is perpendicular to the magnetization, so turning the magnet turns the polarization.
The T-Spin2X is derived from research by TeraSpinTec’s founders, published in Nature Photonics in 2016, and optimized for 800 nm excitation, the wavelength of Ti:sapphire amplifiers. Our terahertz emitter guide compares spintronic emitters with photoconductive antennas, nonlinear crystals and plasma sources.
Applications
- Nonlinear THz spectroscopy and strong-field excitation
- Ultrabroadband THz time-domain spectroscopy (THz-TDS)
- THz near-field microscopy
- THz scanning tunneling microscopy
- Ultrafast photodetection: the THz pulse follows the pump pulse envelope
- Arrival-time and pulse-shape monitoring at large-scale X-ray facilities such as free-electron lasers
Which T-Spin fits your setup?
All three emitters cover 0.1 to 30 THz. They differ in size and in the pump energy they are built for.
| T-Spin1 | T-Spin2 | T-Spin2X | |
|---|---|---|---|
| Best for | Oscillators and focused beams: linear spectroscopy, microscopy | Amplified lasers with large or collimated beams: high THz fields | Like the T-Spin2, but optimized for 800 nm excitation |
| Pump beam | Focused, up to 4 mm | Focused or collimated, up to 34 mm | Focused or collimated, up to 34 mm, optimized for 800 nm |
| THz peak field | ≥100 V/cm | ≥300 kV/cm | ≥600 kV/cm, twice the T-Spin2 |
| Bandwidth | 0.1 to 30 THz | 0.1 to 30 THz | 0.1 to 30 THz |
| Emitter diameter | 12.7 mm | 50.8 mm | 50.8 mm |
| Rotation mount | Thorlabs RSP05/M type | Thorlabs RSP2/M type | Thorlabs RSP2/M type |
Field values depend on the pump laser. T-Spin2 and T-Spin2X: peak fields in the focus with 5 mJ pump pulses of 45 fs at 800 nm and 1 kHz. See the T-Spin1 for oscillators and the T-Spin2 for other amplified lasers.
Frequently asked questions
How does the T-Spin2X differ from the T-Spin2?
Both have a 50.8 mm emitter in a 2-inch rotation mount and take pump beams up to 34 mm. The T-Spin2X is optimized for 800 nm. Under identical excitation at 800 nm, it reaches twice the peak THz field of the T-Spin2: more than 600 kV/cm with 5 mJ pump pulses, against more than 300 kV/cm.
How does it compare with a lithium niobate source?
In our comparison under similar excitation (45 fs pulses at 800 nm, 1 kHz), the T-Spin2X gave a higher peak field and a much shorter pulse, so a much broader spectrum. It needs no phase matching, which keeps the alignment simple.
Do I need a filter to block the pump light?
No. The T-Spin2X absorbs practically all of the pump light at around 800 nm, so none of it comes out with the THz beam and you need no filter to block it.
Can I pump it at other wavelengths?
Yes. Like all T-Spin emitters, it works with pump wavelengths from the mid-infrared to X-rays. Its optimization targets 800 nm.
What bandwidth will I get?
That depends mostly on your pump pulse duration, because the bandwidth scales roughly inversely with it. With 15 fs pulses the spectrum covers 0.1 to 30 THz without gaps. Our terahertz emitter page shows expected spectra for pump pulses from 10 to 200 fs.
Does the T-Spin2X need a bias voltage or electronics?
No. The T-Spin2X is fully passive: the pump pulse and the built-in magnet are all it needs. To turn the THz polarization, turn the emitter in its rotation mount.
Get a quote for the T-Spin2X
Tell us how many T-Spin2X emitters you need, and we’ll send you a quote.
